Kenwood DPX-8030MD - Manual (Page 40)

English
— 40 —
Troubleshooting Guide
MP3/WMA source
? Cannot play an MP3/WMA. 67
✔ Not conforming to ISO 9660 Level 1/2, Joliet, and Romeo.
☞ Use a medium conforming to ISO 9660 Level 1/2, Joliet, and
Romeo.
✔ The MP3/WMA has no or invalid file name extension.
☞ Add the ".MP3/.WMA" extension to the MP3/WMA file name.
✔ The media is scratched or dirty. 69
☞ Clean the media, referring to the section on <CD cleaning> (page
5).
? Noise or no sound generated when an MP3/WMA is played. 70
✔ The file has the MP3/WMA file name extension while it is not an
MP3/WMA.
☞ Do not use the ".MP3/.WMA" extension in non-MP3/WMA.
? Takes time before the unit starts playing MP3/WMA. 71
✔ The medium contains many folders, files, and hierarchical levels.
☞ The unit checks all files on the loaded medium first. If the medium
has many files recorded, it may take a long time for the unit
before it starts playing MP3/WMA.
? Fails to play MP3/WMA in the intended order. 72
✔ The MP3/WMA files were not written by the CD writer in the order in
which you wanted them to be played.
☞ Depending on the CD writer, you may be able to set the order in
which MP3/WMA files are to be played by writing them onto a
medium with their file names beginning with play sequence
numbers such as "01" to "99".
? The sound skips when an MP3/WMA is being played. 73-1
✔ The media is scratched or dirty.
☞ Clean the media, referring to the section on <CD cleaning> (page
5).
✔ The recording condition is bad. 73-2
☞ Record the media again or use another media.
? The MD does not load.
✔ The insertion orientation of the MD is incorrect or the MD is upside
down.
☞ Insert the MD in the proper orientation.
? Direct Track Search and Direct Disc Search can’t be done.
✔ Another function is ON.
☞ Turn Random Play or other functions OFF.
? Track Search can't be done. 66-2
✔ For the discs first or last song.
☞ For each discs, Track Search can't be done in the backward
direction for the first song or in the forward direction for the last
song.
? The disc title is not displayed correctly.
✔ Because <MD Group Setting> (page 30) is set to OFF, the Disc title
and Group title are displayed.
☞ Set <MD Group Setting> of <Function Setting System> (page 30)
to ON.
? Can’t select the song you want to listen to.
✔ The song you want to listen to has not been registered in any group.
☞ Set <MD Group Setting> of <Function Setting System> (page 30)
to OFF or register the song into any Group.
DPX-8030MD_U.S_r3 02.3.22 3:14 PM Page 40