Klipsch ROOMGROOVE - Manual (Page 7)

Warranty – U.S. and Canada
Klipsch warrants to the original retail purchaser that this product is
to be free from defective materials and workmanship for a period
of one (1) year, from the date of purchase, if it is properly used and
maintained. If this product proves defective in either material or
workmanship, Klipsch, at its option, will (a) repair the product, or (b)
replace the product, at no charge for parts or labor. If the product
model is no longer available and cannot be repaired effectively or
replaced with an identical model, Klipsch at its sole option may
replace the unit with a current model of equal or greater value. In
some cases, modification to the mounting surface may be required
where a new model is substituted. Klipsch assumes no responsibility
or liability for such modification. To obtain a repair or replacement
under the terms of this warranty, please contact our customer
service group at 1-800-KLIPSCH. You will be required to submit a
copy of the original receipt via fax or email. The receipt must reflect
that you are the original purchaser, the product was bought from an
authorized Klipsch retailer, and the product is still within warranty.
You will be issued a return authorization number (RA#) and asked to
ship the defective product, together with proof of purchase and RA#,
prepaid insured to the address set forth Klipsch 137 Heampstead
#278 Hope, AR 71801. Freight collect shipments will be refused.
Risk of loss or damage in transit is to be borne by the purchaser.
Once Klipsch receives the defective product, a repair or replacement
order will be initiated.
Limitations:
• This limited warranty does not cover failure of the product
resulting from improper installation, misuse, abuse, accident,
neglect, mishandling, or wear from ordinary use or environmen-
tal deterioration.
• This limited warranty does not cover cosmetic damage,
including paint damage, or consequential damage to other
components or premises which may result for any reason
from the failure of the product.
• This limited warranty is null and void for products not used in
accordance with Klipsch’s instructions.
• This limited warranty is null and void for products with altered or
missing serial numbers and for products not purchased from an
authorized dealer.
• This limited warranty terminates if you sell or otherwise transfer
this product to another party.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE
TO STATE, JURISDICTION TO JURISDICTION OR COUNTRY TO
COUNTRY. KLIPSCH’S RESPONSIBILITY FOR MALFUNCTIONS AND
DEFECTS IN HARDWARE IS LIMITED TO REPLACEMENT OR REPAIR
AS SET FORTH IN THIS WARRANTY STATEMENT. FOR CANADIAN
CUSTOMERS, KLIPSCH DISCLAIMS ALL OTHER WARRANTIES AND
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE,
FOR THE PRODUCT. FOR U.S. CUSTOMERS, ALL EXPRESS AND
IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN TIME
TO THE TERM OF THIS WARRANTY. SOME STATES, JURISDICTIONS
OR COUNTRIES DO NOT ALLOW THE EXCLUSION OF CERTAIN
IMPLIED WARRANTIES OR CONDITIONS, OR LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY OR CONDITIONS LASTS, SO THIS
LIMITATION MAY NOT APPLY TO YOU. KLIPSCH DOES NOT ACCEPT
LIABILITY FOR SPECIAL, INDIRECT, CONSEQUENTIAL OR INCIDENTAL
DAMAGES, INCLUDING WITHOUT LIMITATION, ANY LIABILITY FOR
THIRD PARTY CLAIMS AGAINST YOU FOR DAMAGES OR FOR
PRODUCTS NOT BEING AVAILABLE FOR USE. THE MAXIMUM
LIABILITY FOR WHICH KLIPSCH MAY BE RESPONSIBLE WILL BE NO
MORE THAN THE AMOUNT YOU PAID FOR THE PRODUCT THAT IS
THE SUBJECT OF THE CLAIM. SOME STATES, JURISDICTIONS OR
COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
Warranty Outside the United States and Canada
The Warranty on this product if it is sold to a consumer outside of the
United States and Canada shall comply with applicable law. To obtain any
applicable warranty service, please contact the dealer from which you
purchased this product, or the distributor that supplied this product.
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and radiates radio frequency energy and, if not installed and used in
accordance with the instruction, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
In accordance with FCC requirements, changes or modifications not
expressly approved by Klipsch could void the user’s authority to operate
this product.
This device generates and uses radio frequency (RF) energy, and if not
installed and used properly, this equipment may cause interference to
radio and television reception.
If this equipment does cause interference to radio or television reception
(which you can determine by unplugging the unit), try to correct the
interference by one or more of the following measures:
• Re-orient the receiving antenna (that is, the antenna for the
radio or television that is “receiving” the interference).
• Move the unit away from the equipment that is receiving
interference.
• Plug the unit into a different wall outlet so that the unit and the
equipment receiving interference are on different branch circuits.
If these measures do not eliminate the interference, please consult
your dealer or an experienced radio/television technician for additional
suggestions.
Also, the Federal Communications Commission has prepared a helpful
booklet, “How To Identify and Resolve Radio TV Interference Problems.”
This booklet is available from the U.S. Government Printing Office,
Washington, DC 20402. Please specify stock number 004-000-00345-4
when ordering copies.
This product complies with DHHS Rules 21 CFR Subchapter J. Applicable
at the date of manufacture.
This Class B digital apparatus complies with Canadian ICES-003. Cet
appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.
FCC Declaration Of Conformity
Trade Name: Klipsch Audio Technologies
Product Name: Audio Speaker System
Model Number: RoomGroove
Responsible Party
Manufacturer:
Klipsch Audio Technologies
Address: 3502 Woodview Trace, Suite 200
Indianapolis, IN 46268
Telephone: 317-860-8100
Date: 1/15/2006
These devices were tested and found to comply with Part 15 of
the FCC Rules. Operation is subject to the following conditions: The
devices may not cause harmful interference, and the devices must
accept any interference received, including interference that may
cause undesired operation.
6
RoomGroove