Kodak KY0730485 - Manual (Page 12)

Matchprint Professional Server for DocuColor 12 Printer/Copier – Quick Start
2002 Kodak Polychrome Graphics. All Rights Reserved.
12
7. From the Device drop-down list box, choose either the DocuColor 12
Scanner or the Spectrocam Device.
8. From the Media Type drop-down list box, select the media to be calibrated.
Note: Transparency media cannot be calibrated.
9. From the Media Size drop-down list box, select the media size on which to
print the calibration form.
10. From the Tray drop-down list box, select the input tray containing the
specified media.
The input tray can be specified if the user wants to calibrate the media
contained in a specific tray of the DocuColor 12. An Automatic selection
chooses the input tray if no input tray is specified. If ExtraHeavyweight or a
KPG/Xerox co-branded media is selected, the input tray defaults to Manual
Feed. In this case, the user is not able to change the input tray.