Kenwood CD-423M User Manual
Page 11
11
Preparation
Preparation
L
A
L
A
D
A
T
R
A
E
3
D
Disc replacement
Discs can be replaced with the same procedure as “Loading discs
in the carousel”.
In stopped condition, all discs can be exchanged.
However, when the door panel is opened while “DISC DETEC-
TION” is being displayed, it may not be possible to remove the
disc which had been played. Accordingly, wait for the “DISC
DETECTION” indication to go out before opening the door panel.
When the disc information has been read in at the time of regis-
tration of disc information like title, music type, etc., the disc
information can be recalled even when the disc insertion place
is changed.
¡
÷ When a title has been registered and the door panel is closed, reading
operation is performed automatically.
The display flashes.
In regard to ALL DATA READ mode
The disc information for all discs will be read. We recommend to
execute this mode before playback after discs have been exchanged.
Close the door panel before operation.
1 Press the MODE key.
2 Select “ALL DATA READ”.
3 Set the input.
Each press switches the modes as follows:
Search in progress or
reading information
The display flashes.
When the disc is CD-TEXT
÷ Repeat the above procedure so that the complete disc information is
read into the CD player.
÷ In the case of a non-CD-TEXT disc, the “D001:NO CD TEXT” display
will appear for approx. 3 seconds.
1. Please remove all CDs from the carousel before moving the unit.
2. If blinking “PLEASE WAIT” is displayed when the door panel is opened, do not attempt to change the disc.
4
Close the door panel.
To quit ALL DATA READ mode
Press the
7 key.
1 MUSIC TYPE
2 USER FILE
3 DISC SEARCH
4 TITLE INPUT
5 ALL DATA READ
6 ALL INFORMATION
Notes
Notes
D
D
S
I
C
C
E
R
D
A
N
I
3
G
0
D
1
0
:
:
D
C
T
A
X
E
3
T
MODE
DISC SKIP
DOWN
UP
SET
I
D
C
S
D
T
E
C
E
I
T O N