Konica Minolta BIZHUB C280 - Manual (Page 29)

bizhub C360/C280/C220 (Version 3) 3-13
3.3 Installing using plug and play 3
3.3.3 Windows 2000
1
Connect this machine to the computer using a USB cable, and then start the computer.
NOTICE
During startup of the computer, do not unplug or plug the cable.
2
Insert the printer driver DVD-ROM into the DVD-ROM drive of the computer.
3
Turn on the main power of this machine.
[Found New Hardware Wizard] appears.
4
Select [Search for a suitable driver for my device (recommended)], and then click [Next >].
5
Select [Specify a location], and then click [Next >].
6
Click [Browse...].
7
Select a desired fax driver folder on the DVD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used.
8
Click [OK], and then follow the instructions on the pages that follow.
% If the [Digital Signature] window appears, click [Yes].
9
Click [Finish].
10
After finishing the installation, make sure that the icon for the installed printer is displayed in the [Print-
ers] window.
11
Remove the DVD-ROM from the DVD-ROM drive.
This completes the fax driver installation.