Samsung SGH-T208 - Manual (Page 38)

Messages
72
Setup
(Menu 1.4)
Via this menu, you can set up default SMS
information. A setting group is a collection of
settings required to send messages. The number of
setting groups available depends on the capacity of
your SIM card. The setting group you last accessed
is automatically activated for message transmission
and you can see a check mark in front of it.
Setting x (where x is the setting group number):
each group has its own sub-menu.
Service Centre: allows you to store or change the
number of your SMS centre required when sending
messages. You must obtain this number from your
service provider.
Default Type: allows you to set the default message
type (Text, Fax, Email and Paging). The network
can convert the messages into the selected format.
Default Validity: allows you to set the length of time
for which your text messages will be stored at the
message centre while attempts are made to deliver
them.
Setting Name: allows you to give a name to the
setting group currently being defined.
Common Setting: the following options are
available.
Reply Path: allows the recipient of your SMS
message to send you a reply message via your
message centre, if the service is provided by the
network.
Delivery Reports: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether your
message has been delivered or not.
Messages
73
Broadcast
(Menu 1.5)
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately as they
are received, provided that:
• the phone is in idle mode.
• the Receive option is set to Enable.
• the message channel is currently active in the
channel list.
The following options are available:
Read: lets you view the message. Volatile
displays the messages from the network, but loses
its contents as soon as the phone is switched off.
Scroll through the message by using the
and
keys. While reading a message, press the Save
soft key to store it into the Archive box for later
retrieval.
Receive: allows you to enable or disable the
reception of broadcast messages.
Channel List: allows you to indicate the channels
from which you wish to receive broadcast
messages. The following options are available.
Select: used to enable or disable channels in the list
by marking or unmarking them respectively (a
check mark is displayed in front of each channel
selected).
Add Channel: used to declare the ID and title for a
new channel.
Delete: used to remove a channel from the list.
Edit: used to change the ID and title of an existing
channel.