Keyspan URM-17A - Manual (Page 3)

2 Installation Instructions
Overview
The Remote for iTunes can be used when it is directly connected to your computer (standard
configuration) or when it is connected to your Airport Express (when you have upgraded your
Remote for iTunes). Depending on where the Remote for iTunes RECEIVER is connected, you
will have different ways of controlling your computer.
When the Remote for iTunes receiver is connected to your Mac or Windows computer, you will be
able to control any application by using the Keyspan Remote for iTunes software. In this setup,
your Keyspan Remote for iTunes and your computer are in close proximity of each other. In this
setup, the Remote for iTunes uses Keyspan's software to control your applications. The Keyspan
software is preconfigured to control many popular media applications (such as iTunes, PowerPoint,
Windows Media Player, etc.) and you can also customize the Keyspan software to perform
different actions (ie keystrokes, launch applications, control system volume, etc.).
If you are using your Remote for iTunes when it is connected to your Mac or Windows, you will
need to install the Keyspan software for your specific operating system. These instructions are
provided later in this section.
If you are using your Remote for iTunes when it is connected to your Airport Express, no further
Keyspan software installation is necessary (see Tech Note below).
Tech Note: Requirements For Connecting Via Airport Express:
Please note that in order to use the Remote for iTunes via Airport Express you will
need iTunes version 4.7 (or later) running on Windows 2000/XP or Mac OS X
10.3 (or later), Airport Express Firmware version 6.1 (or later), Keyspan
Remote for iTunes remote control model URM-17A, and Keyspan Remote for iTunes
receiver model UIA-11H or UIA-11F that has been upgraded to be AirPort Express
Compatible (contact Keyspan for details).
When the an upgraded Remote for iTunes receiver is connected to your Airport Express, you will
be able to control iTunes via the Airport Express. In this setup, your Keyspan Remote for iTunes
and Airport Express are in close proximity of each other while your computer is another location.
In this setup, the Remote for iTunes will only control iTunes and no other application. This
requires that you have iTunes version 4.7 (or later) running on Windows 2000/XP or Mac OS X
10.3.x, Airport Express firmware version 6.1 (or later), Keyspan Remote for iTunes remote control
model URM-17A, and Keyspan Remote for iTunes receiver model UIA-11H or UIA-11F. No
Keyspan: Remote for iTunes - User Manual (Mac OS X & Windows)
This User Manual applies to the Keyspan Remote for iTunes Software Version 2.3
Rev 2005jun01 Page 3