To change or delete a title, Preparation, Perform steps – Kenwood DPF-J7020 User Manual
Page 22: Of “assigning title, Change or delete characters one by one. change, Deletion
22
DPF-J7020 (EN)
Registration of Title
C
A
Z
B
= >
O
S
E
N
O
B
Y
D
T
C
O
M
L
N
= >
O
S
E
N
O
B
Y
D
T
C
Preparation
÷ Close the door panel.
!
1
Perform steps
1
and
2
of “Assigning Title”.
)¡
÷ Call the disc to be changed.
÷ Deletion mode is cancelled when the MODE key is pressed.
To change or delete a title
2
Change or delete characters one by one.
Change
1Move the cursor to the desired character (to be
changed).
2Select a character.
1Move the cursor to the desired character (to be
deleted).
Deletion
2Press the DELETE key.
÷ If the title to be changed is too long to be displayed on the display
section, press the
1 or ¡ key to scroll the display so that the
characters hidden until then appear.
+ Move with the 1 ¡ keys =
÷ When a title is to be deleted, delete all characters one by one.
3Delete the unnecessary character.
(See “Deletion”.)
LEFT
RIGHT
CURSOR
1
¡
BEST
SELECTION
RANDOM
DISPLAY
3
2
4
CONFIRM
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
X
Y
Z
W
REPEAT
1
7
6
8
5
+10
/
0
.
+100
9
–
DISC
SELECTOR
(
'
)
LEFT
RIGHT
CURSOR
1
¡
3
Execute title change or deletion.
To quit title input mode
Press the MODE key.
ENTER
6
To enter a space
DELETE
/CLEAR
SPACE
/CHECK
÷ If a desired character is not provided on the remote control keys, input
the character as follows. Press the CHARACTER DOWN/UP key
(
4,¢) until the character to be entered comes to the position of the
flashing cursor. Then, press the SET key.
÷ The characters also can be selected with the DISC SKIP knob on the
main unit. Turn the knob until the character to be entered comes to the
position of the flashing cursor. Then, press the SET key.
Flashing cursor