KORG UPGRADE GUIDE D32XD - Manual (Page 2)

Recalling a mixer setup
Here’s how to recall a previously-stored mixer setup program.
You can’t recall a setup while a song is playing.
1. Access the MIXER, “MIXER SET UP,” “MixerSetUp” top
panel.
2. In the list, press to highlight the program that you want to
recall.
3. Press the Recall button to open the Recall Program dialog
box.
4. Execute the recall.
Press the Yes button to recall the settings.
If you decide to cancel, press the No button.
A program saved from a 44.1 kHz or 48 kHz song can be recalled into
either a 44.1 kHz or 48 kHz song, but not a program saved from a 96
kHz song.
A program saved from a 96 kHz song must be recalled into a 96 kHz
song.
When the D32XD/D16XD is shipped from the factory, mixer setup
programs 1 through 20 are
“NoData.” Recalling one of these programs
will set the mixer to the same settings as when it is initialized (i.e., when
you create a New Song).
Top panel keys
MIXER key ( → Manual: p.10, 99)
Pressing the MIXER key displays the page jump menu screen.
Pressing the MIXER key again displays the most recently selected
page within the page jump menu. Pressing the MIXER key yet
again returns to the page jump menu screen.
In this way you can alternate between the page screen and the
page jump menu screen by pressing the
MIXER key.
CD key ( → Manual: p.10, 122)
Pressing the CD key displays the page jump menu screen. Press-
ing the CD key again displays the most recently selected page
within the page jump menu. Pressing the CD key yet again re-
turns to the page jump menu screen.
In this way you can alternate between the page screen and the
page jump menu screen by pressing the
CD key.
UNDO key ( → Manual: p.10)
Pressing the UNDO key displays the “Undo/Redo” tab page.
Pressing the UNDO key again returns to the page in which you
were prior to pressing the key.
SCRUB key ( → Manual: p.11, 40, 148)
Pressing the SCRUB key displays the “Scrub” page. Pressing the
SCRUB key again returns to the page in which you were prior to
pressing the key.
SCRUB
( → Manual: p.40, 148)
While the “Scrub” page is displayed, you can use the LOC1 –
LOC6 keys, MARK JUMP è , or the counter to change the lo-
cation just as when you’re in other pages ( → Manual: p.38).
You can also change the location by using the STOP key and
MARK JUMP √® keys in combination ( → Manual: p.151).
If you want to return to scrubbing after you’ve used the counter
to change the location, press a button outside the waveform win-
dow or counter, or press the cursor
† key.
Trigger recording is not available for the master track.
You can’t perform trigger recording if the MASTER TRACK
STATUS key is set to REC .
(4)
Added functionality
Added message
(→Manual: p.170)
Change and caution when adjusting the moving fader sensitivity
The song used to adjust the sensitivity of the D32XD ’s moving faders has been renamed from “WAVE FADER” to “TouchSenseAd-
just” ( → Manual: p.2).
Repeatedly playing back the song “TouchSenseAdjust” (included when the D32XD is shipped) for an extended period of time will shorten the lifespan
of the faders. Use this song only when you need to adjust the touch sensitivity of the faders; do not play it back continuously for any other purpose.