Konica Minolta DiMAGE S404 - Manual (Page 46)

adjust set
1
2
To adjust the exposure, press the expo-
sure-compensation button (1).
• The exposure compensation screen will
appear.
Use the left/right keys of the controller
(2) to adjust the exposure-compensation
value.
• Change in exposure compensation is
visible in the live image on the monitor.
EXPOSURE COMPENSATION
The camera exposure can be adjusted to make the final picture lighter or darker by as much as ±2Ev
in 1/3 increments. The exposure-compensation value will remain in effect until it has been reset. In
auto-recording mode, exposure compensation is also reset when the mode dial is moved to another
position.
The exposure compensation must be set before the image is captured. When setting the exposure
compensation, the amount of compensation is shown next to the exposure-compensation icon on the
monitor. After the setting is made, the shutter-speed and aperture displays will indicate the actual
exposure. Because the exposure can be adjusted in fine steps, the shutter speed or aperture value
displayed may not change. When set to any value other than 0.0, the exposure-compensation icon
will remain on the data panel and LCD monitor as a warning.
46
AUTO-RECORDING MODE