Kawai CN22 - Manual (Page 25)

Page
25
5
FUNCTION MODE
5. FUNCTION MODE
The Function Mode settings allow various advanced parameters of the CN22 digital piano to be adjusted.
1) BASIC OPERATION
Step 1
Press and hold the METRONOME and SOUND SELECT buttons simultaneously, then press one of the 10
keys assigned to the desired function.
The LED indicators for the METRONOME and SOUND SELECT buttons will start to fl ash while the settings are being
adjusted.
„ If the LED indicators for either the CONCERT MAGIC or LESSON buttons are turned on, the Function Mode cannot be
used.
Step 2
While still holding down the METRONOME and SOUND SELECT buttons, press the ‘- (off)’ or ‘+ (on)’ keys
to change the value for the selected function.
„ While holding down the METRONOME
and SOUND SELECT buttons, it is
possible to select other functions,
changing each value successively.
Step 3
Release both the METRONOME and SOUND SELECT buttons to exit Function Mode.
„ When the power is turned off, Function Mode settings will be reset to the factory default
values, shown below.
Function Default
TOUCH Normal
TRANSPOSE 0
TUNING A4=440.0Hz
REVERB On
DAMPER EFFECT 2 (Normal)
CONCERT MAGIC MODE Mode 1
MIDI CHANNEL SELECT 1ch
MIDI LOCAL CONTROL ON/OFF On
MULTI TIMBRAL MODE ON/OFF Off
TRANSMIT MIDI PROGRAM CHANGE On
Use the enclosed ‘function label’
(page 8) for your convenience.
Hold down the both buttons
number keys 10
TRANSMIT MIDI PR
OGRAM CHANGE
9
MUL
TI
TIMBRAL MODE ON/OFF
8
MIDI LOCAL CONTR
OL
7
MIDI CHANNEL SELECT
6
CONCER
T MA
GIC MODE
5
D
AMPER EFFECT
4
REVERB
3
TUNING
2
TRANSPOSE
1
TO
U
C
H
MIDI settings
1 2 3 4 5 6 7 8 9 0
- +
off on