Kompernass KH 1117 - Manual (Page 4)

6
Operation
The chimney is operated by means of three switches:
Function switch:
You can set the basic functions with the Function
switch.
➩
Turn the Function switch ➀ step by step for
the following settings:
Thermostat:
If you have selected a setting with heat emission
through the Function switch ➀ you can control the
room temperature with the thermostat ➁.
➩ Turn the Thermostat ➁ to the "max“ position.
As soon as the desire room temperature is reached...
➩
Turn the Thermostat ➁ back till you hear an audible
click.
The in-built thermostat now ensures a constant room
temperature.
Flame regulator
With the Flame regulator ➂ you can regulate the
flame to any size.
➩
Turn the Flame regulator ➂ in the clock-wise
direction until the desired flame size is obtained.
Replacing the bulbs
ƽ
Danger of life-threatening electric shock:
• Before you replace the bulbs, pull out the plug
from the power socket,
• and let it cool down completely.
• Only use candle bulbs with an E-14 thread and
max. 25 Watt
➩
Loosen both the screws ➃ with a slotted screwdriver.
➩ Carefully lift the glass top forward and put it down
safely.
➩ Take out the glowing embers ➄ by pressing with both
the hands and taking it forward.
➩ Now replace the bulbs.
➩ Reassemble the chimney in reverse order and fix the
glass plate with the screws.
Cleaning
ƽ
Danger of life-threatening electric shock:
• Before you clean the chimney, pull out the plug
from the power socket,
• and let it cool down completely.
• Never immerse the chimney in water or other
liquids for cleaning
➩ Clean the casing with a damp cloth.
➩ Clean the glass plates with a glass cleaner.
Do not use cleansers or solvents. They can damage
the plastic surfaces.
Disposal
Never dispose off the appliance with normal household
waste.
Enquire with your local town council or regional
authority about the appropriate method of environment-
friendly disposal.
Warranty & customer service
The warranty conditions and service centre address
can be found in the enclosed warranty slip.
0 OFF
Position Setting
only flames
Ventilator without heating
low heat emission (900 W)
maximum heat emission (1850 W)
IB_KH1117_UK.qxd 16.09.2004 8:27 Uhr Seite 6