KORG SP-500 - Manual (Page 68)

68
5. Convenient functions
Adjusting the left/right balance
Here’s how to adjust the left/right balance of the
sound.
1 Press the [FUNCTION] switch
2 Access the “Func 2/10” screen
3 Adjust the “Pan”
If you are not using layer or split, or if
you wish to change the panning of Upp1
when using Layer, press “▲” or “▼” for
the “Upp1” cell to change the value.
To change the panning of Upp2 when
using Layer, press “▲” or “▼” for the
“Upp2” cell to change the value.
To change the panning of the lower
sound (Low) when using Split, press “▲”
or “▼” for the “Low” cell to change the
value.
The available range is Off*, L15 (left
only)–Cnt (center)–R15 (right only), and
Prg (the value specified by the program).
* Only the sound processed by the reverb
or effect will be heard.
For some programs, “Pan” will have no effect.
To return to the previous display
If you press the [EXIT] switch or the
[FUNCTION] switch, the [FUNCTION]
switch indicator will go dark, and you
will return to the previous LCD screen.
Adjusting the display time of a
popup screen
1 Press the [FUNCTION] switch
2 Access the “Func 10/10” screen
3 Adjust the display time
Use “Prog/Style” to adjust the time that
the popup screen that appears when you
switch the program or rhythm style will
remain visible. Use “Other Page” to
adjust the time that popup screens for
other settings will be displayed.
The available range is 0.1–10 seconds.
To write settings into internal memory
In the “Func 7/10” page, execute “Write.”
If you turn off the power without writing,
the previous settings will reappear.
To return to the previous display
If you press the [EXIT] switch or the
[FUNCTION] switch, the [FUNCTION]
switch indicator will go dark, and you
will return to the previous LCD screen.