Konica Minolta 7222 - Manual (Page 91)

Copying Using Memory (continued)
3-29
5.
Press [START] to start scanning the reserve job.
When setting more than one reserve job, the next reserve job setting will be
available after the copier starts to scan for the previous reserve job.
When completed, the Basic Screen for the current printing job will be restored.
Repeat steps 2 to 5 to reserve more than one job.
6.
Output of the reserve job will start automatically after completing the
current job.
When the finisher / paper exit / inner tray capacity is exceeded due to
the print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Lens Mode
Density
1-1, 2-2
2-1
Staple
Punch
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Copy Size
Fold/
Fold&Stitch
Output with
Inner Tray