Kingston Technology KNE16WG - Manual (Page 27)

Appendix D Mounting Templates 21
EtheRx User’s Guide - Rev. B00 Kingston Technology Company
Appendix D Mounting Templates
The EtheRx WorkGroup hubs can be stationed on a flat surface using the four
rubber feet provided, or mounted vertically by using the mounting holes on the
bottom side of the unit. The illustrations below detail the measurements and
mounting holes and rubber feet locations. They are drawn to scale, although
not actual size.
8-Port Front Panel
16-Port Front Panel
Rear Panel
13.10"
Rear Panel
6.50"
4.28"
1.08"
6.10"
3.05"
10.60"
3.05"
6.10"
13.10"
1.20"
Fig. D-1 Mounting Template specifications