Kenwood KDC-MP919 User Manual
Page 13
Switching the information displayed in Standby.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3
Select Display Control mode
Press the [FM] or [AM] button.
Select the "Display Mode Select"/"Disp Mode Select" display.
4
Enter Display Control mode
Press the [
4] or [¢] button for at least 1 second.
5
Switch the display
Press the [
4] or [¢] button.
Each time the button is pressed the display switches.
Information
Display
Demonstration
"DEMONSTRATION"
Date & Clock
"DATE"/"CLOCK"
Standby display
"ALL OFF"
6
Exit Display Control mode
Press the [MENU] button.
Demonstration can be selected when "Display Type A" or "Display
Type C" is selected in <Switching Display Type> (page 32).
Switching the Standby Display
— 13 —
Switching the Full screen display.
1
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
2
Select Display Control mode
Press the [FM] or [AM] button.
Select the "Display Mode Select"/"Disp Mode Select" display.
3
Enter Display Control mode
Press the [
4] or [¢] button for at least 1 second.
4
Switch the Full screen display
Press the [
4] or [¢] button.
Each time the button is pressed the display switches.
Information
Demonstration
Spectrum Analyzer 1
Spectrum Analyzer 2
Spectrum Analyzer 3
Graphic 1 (KDC-MP919/ X759)
Spectrum Analyzer 4 (KDC-X859)
Graphic 2 (KDC-MP919/ X759)
Spectrum Analyzer 5 (KDC-X859)
5
Exit Display Control mode
Press the [MENU] button.
Full Screen display can be selected when "Display Type C" is
selected in <Switching Display Type> (page 32).
Switching Full Screen Display
KDC-X859_U.S_r1 01.12.10 9:40 AM Page 13