Kenwood KDC-9017 - Manual (Page 23)

Function of the KDC-X917/KDC-X817
RDS features
You can search for the station for any station if its name has
been preset using Station Name Preset.
Press the DNPP button on the remote.
"SNPP" will be displayed once the station name preset play
mode is entered.
The names of the stations stored in the band currently listened
to are displayed in the following order for five seconds each:
Each time you press the ¢ button, the station display
switches in the forward direction.
Each time you press the
4 button, the station display
switches in the reverse direction.
Stations whose names have not been stored will be displayed
as frequencies.
The program service name will appear for RDS stations. (KDC-
X917/X817 only)
Changing the Displayed Band
Pressing the FM button switches between the FM1, FM2, FM3
and AM displays, in that order.
Pressing the AM button switches between the displays in the
reverse direction.
Once the name is displayed for the station you want to
listen to
Press the OK button.
Reception starts of the displayed station, and the station name
preset play mode ends.
Canceling mode during input:
Press the DNPP button.
The station name preset play mode is canceled.
2
NOTE
= FM1 Ô FM2 Ô FM3 Ô AM +
1
Station Name Preset Play (SNPP)
(Function of Remote)
— 23 —
PTY
LOUD
OFF
NF
DAB
AUD AME MENU
ANG
NAME
DISP AUTO
CLK
PTY
DISP/
NAME
FM
AM
#1-6
¢
4
TI indicator
Program Service name
Radio text
RDS indicator
KDC-X917(K)_U.S_r3 00.12.26 1:12 PM Page 23