Kyocera Finecam SL400R - Manual (Page 113)

6-5
6
G
Using
th
e
SE
T
UP
M
ode F
unc
tions
• The default setting for this function is [NO DATE].
• If you set [WITH DATE], the date is permanently displayed in the lower-right corner of the LCD
monitor during shooting.
• If the background where the date is inserted is a bright color such as white or yellow, the numbers
in the date may be difficult to read.
Forgetting to switch the camera off can cause the camera’s battery charge to fall to a low
level. For this reason, the camera features a Power Save function that automatically
switches the camera off after several minutes if it is left switched on.
You can specify the delay until the camera is switched off.
1
Switch the camera on and press
O
or
Q
on the mode
button until the “
G
” icon lights on the mode select LED.
2
Press
U
or
D
on the 4-way button to select
[INSERT DATE] and then press
R
.
3
Press
U
or
D
on the 4-way button to select
[NO DATE] or [WITH DATE] and then press
the OK button
E
.
4
Date insertion is set and the screen in step 2 reappears.
[POWER SAVE]
Switching the Camera Off
Automatically to Save Power
1
Switch the camera on and press
O
or
Q
on the mode
button until the “
G
” icon lights on the mode select LED.
2
Press
U
or
D
on the 4-way button to select
[POWER SAVE] and then press
R
.
AF MODE
FORMAT
BRIGHT CNTRL
BACKLIGHT
DATE
SAF
EXECUTE
STANDARD
BRIGHT
2004.01.01
INSERT DATE NO DATE
SET UP(1/3)
AF MODE
FORMAT
BRIGHT CNTRL
BACKLIGHT
DATE
SAF
EXECUTE
FRAMES
BRIGHT
NO DATE
INSERT DATE WITH DATE
SET UP(1/3)
POWER SAVE
MODE LOCK
BEEP
SHUTTER VOL
3MIN.
OFF
+2
+2
COLOR SELECT YELLOW
START SCREEN SET
SET UP(2/3)