Kimber Kable Music Harmony with Science PowerKordsTM - Manual (Page 5)

SSppeecciiaall FFoorrm muullaa PPEE D Diieelleeccttrriicc
A special recipe polyethylene dielectric that
has carefully selected electrical and mechanical
properties for a smooth, sweet and very
natural sound.
TTeefflloonn® ® D Diieelleeccttrriicc
A high pressure, low temperature extruded
Teflon® engineered for maximum signal transfer.
The low temperature extrusion process prevents
conductor surface damage. The sound quality is
accurate, detailed and has incredible
dynamic contrasts.
VVaarriiSSttrraanndd™™ U Ullttrraa--ppuurree aanndd H Hyyppeerr--ppuurree CCooppppeerr
aanndd H Hyyppeerr--ppuurree SSiillvveerr CCoonndduuccttoorrss
VariStrand™ technology controls internal and
external vibration by minimizing resonance within
the cable stranding. This is accomplished by using
variable sized strands in a specific ratio within
each conductor.
TTrrii--bbrraaiidd GGeeoom meettrryy
KIMBER KABLE s distinguishing three-wire braid
was created to reject the deleterious effects of
radio emissions RF/EMI and to preserve signal
fidelity. Radio emissions interact with the infor-
mation traveling down the cable, becoming part
of the signal. They are eventually perceived as
system noise or often a sense that playback has
been altered or is lacking in clarity or purity. Our
three-wire braid rejects the RF/EMI noise
without the use of a signal damaging shield.
GGyyrrooQ Quuaaddrraattiicc GGeeoom meettrryy
The unique four-wire GyroQuadratic braided
geometry is our most sophisticated geometry
both in terms of radio emissions rejection and
preservation of signal integrity. GyroQuadratic
field geometry improves sound quality by
maintaining signal strength and linearity.
U Ullttrraattiikkee™™ aanndd U Ullttrraappllaattee™™ BBllkk
RRCCAA TTyyppee CCoonnnneeccttoorrss
At the heart of these connectors is the
Ultraplate™ contact surface. The Ultraplate™
surface provides high conductivity and great
durability and is compatible with all other plating
surfaces. The Ultraplate™ connector, which is
precision machined, also features a solid Teflon®
dielectric and a split center pin for enhanced
sonic performance.
W WBBTT® ® M Miiddlliinnee RRCCAA TTyyppee CCoonnnneeccttoorrss
The WBT-0147 and WBT-0144 RCA type connec-
tors feature a patented locking mechanism, multi-
layer plating process, with a final plating of 24
karat gold,Teflon® insulation, and a slotted cen-
ter pin for a snug internal connection.
Patent #5,226,841
W WBBTT® ® TToopplliinnee RRCCAA TTyyppee CCoonnnneeccttoorrss
The finest connectors available. Topline
connectors incorporate a higher copper content
and ultra-fine machining. The WBT-0108 features
a solder free crimp technique termination which
utilizes T-6 Torx™ screws for a secure connection.
The Topline RCA features a unique multi-layer
duplex plating process, with a final plating of 24
karat gold. The barrel is finished in polished
ruthenium.
Patent #5,226,841
W WBBTT® ® nneexxttggeenn™™ RRCCAA TTyyppee CCoonnnneeccttoorrss
The WBT-0110 Cu and WBT-0110 Ag are true 75
ohm connectors and utilize many innovative per-
formance features such as : ultimate conductivity,
ultra rapid signal transfer, elimination of eddy
current, and pure conducting materials. The
WBT® patented locking sleeve is finished in
cobalt blue.
Patent #7,001,220 B2
Int. Pat. #0 460 145
Patent# 5,226,841
A number of innovative technologies and materials are used in the
manufacture of KIMBER KABLE analog interconnects: