Kodak ADVANTIX 4700ix - Manual (Page 10)

10
Attaching the Strap
1. Insert the shorter
looped end of the
strap behind the
Strap Post (10).
2. Thread the longer end
of the strap through
the shorter loop.
3. Pull the strap tight.
Loading the Battery
This camera uses one
3-volt lithium KODAK
K123LA (or equivalent)
Battery that supplies
power for all camera
operations.
1. Open the Battery
Door (11) by using
your finger tip.
• Before you remove
the old battery, close
the lens cover/flash.
2. Insert the battery
into the
chamber as
shown.
3. Snap the
battery door
closed.
• After you
load a new
battery into the camera, you will
need to reset the date and time.