Kenwood DVR-505 - Manual (Page 52)

52
DVR-505/DVR-7000 (EN)
Operations
Speaker setting
1 Play a disc marked “Dolby Digital”.
SELECT
2 Select the speaker.
F C R SW
3 Press the TRIM (5/∞) key to setting
the speaker level.
TRIM
M
U
LTI C ON
T.
1 Select the SAT or AV AUX key.
SAT
or
AV AUX
2 Press the INPUT MODE key.
INPUT MODE
RANDOM
Level setting using a music source
A music source can be used for speaker level setting and subwoofer level setting.
Speaker level adjustment can be performed by
pressing the keys F, C, R, and SW.
F: Front speakers
Switching is done as follows each time the switch
is pressed.
1 L ch : Left speaker
2 R ch : Right speaker
C: Center speaker
R: Rear (Surround) speakers
Switching is done as follows each time the switch
is pressed.
1 LS ch : Left surround speaker
2 RS ch : Right surround speaker
SW: Subwoofer
The speaker level can be changed in the range from -10
dB to +10 dB.
Changing the INPUT MODE
Changing the INPUT MODE
The input mode can be switched with SAT and AV AUX.
For listening to SAT input with high sound quality, con-
nect the digital output of your satellite tuner with co-
axial or optical cable and change the input mode as fol-
lows.
Each press switches the mode.
SAT input
1 ANALOG
2 COAXIAL
3 OPTICAL
AV AUX input
1 ANALOG
2 OPTICAL
Note Note Note
When the video is displayed, but no sound is put
out, the source may not contain digital audio. In such
a case, please switch to ANALOG.