Kawai Stage Piano MP5 - Manual (Page 69)

69
2.3 System Realtime Message
Status
F8H Clock
FAH Start
FCH Stop
*Sending [SW] External Seq. Start/Stop
3. Exclusive Data
3.1 Universal Realtime Exclusive Message
Master Volume
Format:F0 7F 7F 04 01 ll mm F7
mm=MSB of Master Volume
ll=LSB of Master Volume
3.2 Dump Message
MP5 can receive this dump data, and also can transmit by the panel operation with System switch.
Also,MP5 can receive MP8/4/9500/9000’s dump data.(Please see the manual of MP8/4/9500/9000 about
the format.)
*note: A Part of MP8/4/9500/9000’s tones or parameters will be replaced to the MP5’s one.
3.2.1 Normal Dump Message
Format:F0 40 <ch> <ff> 00 0E <DATA> F7
<ch> :MIDI ch (00~0F)
<ff> :20=Dump Current / 21=Dump All (Sound or Setup)
<DATA> :Dump Current = 432bytes *Current Setup data in edit buffer or to edit buffer
:Dump All Sound= 12,288bytes
*All Sound 1~256(Sound1-1-A ... Sound 8-8-D)
:Dump All Setup= 110,592bytes *All Setup 1~256 (Setup1-1-A ... Setup 8-8-D)
3.2.2 Divided Dump Message
a: Top Of Data
Format:F0 40 <ch> <ff> 00 0E 01 <LENGTH> F7
<ch> :MIDI ch (00~0F)
<ff>
:22=Dump Current / 23=Dump All
<LENGTH>: 4bytes (7bit*4=28bit, Big Endian)
b: Data Packet
Format:F0 40 <ch> <ff> 00 0E 02 <DATA> F7
<ch> :MIDI ch (00~0F)
<ff> :22=Dump Current / 23=Dump All (Sound or Setup)
<DATA> :max 120bytes that are divided from Dump Current or Dump All
:Dump Current = 432bytes *Current Setup data in edit buffer or to edit buffer
:Dump All Sound=12,288bytes
*All Sound 1~256(Sound1-1-A ... Sound 8-8-D)
:Dump All Setup= 110,592bytes *All Setup 1~256 (Setup1-1-A ... Setup 8-8-D)
c:End Of Data
Format:F0 40 <ch> <ff> 00 0E 7B F7
<ch> :MIDI ch (00~0F)
<ff>
:22=Dump Current / 23=Dump All