Kerio Tech KERIO WINROUTE FIREWALL 6 - Manual (Page 30)

Chapter 3 WinRoute Administration
30
for authentication of the firewall when connecting to the administration from
another host (see Kerio Administration Console — Help).
• Administrator’s guide — this option displays the administrator’s guide in HTML
Help format. For details about help files, see Kerio Administration Console — Help
manual.
• About — this page provides information about current version of the application
(WinRoute’s administration module in this case), a link to our company’s website,
etc.
Status bar
The status bar at the bottom of the administration window displays the following information
(from left to right):
Figure 3.2 Administration Console status bar
• The section of the administration window currently selected in the left column. This
information facilitates navigation in the administration window when any part of the
section tree is not visible (e.g. when a lower screen resolution is selected).
• Name or IP address of the server and port of the server application (WinRoute uses
port 44333).
• Name of the user logged in as administrator.
• Current state of the Administration Console: Ready (waiting for user’s response), Load-
ing (retrieving data from the server) or Saving (saving changes to the server).
Detection of WinRoute Firewall Engine connection drop-out
Administration Console is able to detect the connection failure automatically. The failure is
usually detected upon an attempt to read/write the data from/to the server (i.e. when the Ap-
ply button is pressed or when a user switches to a different section of Administration Console).
In such case, a connection failure dialog box appears where the connection can be restored.
After you remove the cause of the connection failure, the connection can be restored. Admin-
istration Console provides the following options:
• Apply & Reconnect — connection to the server will be recovered and all changes done
in the current section of the Administration Console before the disconnection will be
saved,
• Reconnect — connection to the server will be recovered without saving any changes
performed in the particular section of the console before the disconnection.
If the reconnection attempt fails, only the error message is shown. You can then try to recon-
nect using the File → Restore connection option from the main menu, or close the window and
restore the connection using the standard procedure.