Kodak NOVAJET 700 User Manual
Page 128
Advertising
5-16
Assembly\Disassembly
NovaJet 500/630/700 Series Service Manual
Figure 5-8. Power Supply Removal.
To remove the Cooling Fan and AC Entry Module:
7. Using a #2 Phillips screwdriver, remove the four screws located
below the Right Baseplate securing the Power Supply Bracket to the
Right Baseplate. Remove the Power Supply Bracket.
8. Using a #1 Phillips screwdriver and a 1/4” wrench or socket,
remove the Fan from the Right Baseplate. See Figure 5-9.
Advertising
This manual is related to the following products: