Kodak NOVAJET 700 - Manual (Page 44)

3-2 Maintenance
NovaJet 500/630/700 Series Service Manual
Cleaning Procedures
WARNING
Always turn the printer OFF, remove the power cord and
the interface cable before cleaning the printer. An electri-
cal shock hazard may be present if these procedures are
not followed.
External Cleaning
CAUTION
Do not use abrasive cleansers of any sort on the surfaces
of the printer. Damage to the surface may result.
The exterior surfaces of the printer may be cleaned with a soft cloth
which has been dampened. For more persistent stains, a small amount
of liquid detergent or NovaKlean™ may be used. Cleaning intervals are
determined by the environment in which the printer is used.
Service Station Cleaning
Ink and dust may build up on the service station, resulting in contami-
nation which may smear the prints. The service station is cleaned as
follows:
1. Turn the printer OFF. Disconnect the power cord and interface
cable.
2. Raise the printer lid.
3. Carefully move the carriage toward the center of the printer.