Konica Minolta PagePro 1350W - Manual (Page 9)

9
Controller
The PagePro 1350W uses the
power of the Windows operating
system to deliver great performance
for less cost.
The PagePro 1350W supports the Graphical Display Interface (GDI) for
Windows and, as such, utilizes the power of the host computer’s Pentium-
class CPU for processing documents prior to printing. The printer’s
controller features a Naltec N-1 ASIC for imaging the document.
Printer memory
The PagePro 1350W includes 8 MB of RAM on the controller. This
memory is sufficient for printing all supported page sizes at all supported
resolutions. There is no need for installing additional memory in the
printer. Increasing memory of the host computer may improve
transmission speed and overall performance of the printer.
Host computer requirements
PC Hardware 300 MHz Pentium-class CPU
Operating System • Windows
XP
• Windows
2000
• Windows
ME
• Windows
98 SE
PC memory •
128 MB (XP)
•
64 MB (2000)
•
32 MB (ME)
•
16 MB (98 SE)
Hard disk space 36 MB or more
CD-ROM For installation of drivers and utilities
Interface USB 1.1
IEEE 1284 parallel
(ECP, Nibble, or compatible)