Kenwood TK-2200 - Manual (Page 20)

12
VOX O
PERATION
Note:
◆ While transmitting via VOX, all keys other than power OFF are
disabled.
◆ When you operate the VOX function, you must use an optional
KHS-1 or KHS-22 accessory.
◆ VOX will not operate when the battery level becomes too low.
(The LED will flash red in this state.)
3
2
4
1 Set up a VOX Gain level from 1 to 10 {page 10}.
To transmit, simply speak into the headset microphone.
You do not need to press the PTT switch; the transceiver
automatically detects your voice and begins transmitting.
To stop transmitting, stop speaking.
Transmission will continue momentarily after you stop
speaking, so ensure your transmission will not be cut off.
To exit VOX mode, set the VOX Gain level {page 10} to
OFF.
TK-2200/3200 E 01-33-10 04.7.16, 1:44 PM 12