Kalamazoo Outdoor Gourmet Clausing HBS-1018 User Manual
Page 5
Models AH9AW
KALAMATIC
9" Wet Cutting
Automatic
Bandsaw
Equipped with 2 hp,
208v/230v/460v 3ph
drive motor
Operators can set-up the Kalamatic quickly and
the procedure is easily learned. The feed roller
and saw head is lifted, stock loaded and
positioned, stock stop adjusted for proper
length, the number of pieces required is entered
in the counter and then the cutting cycle is
initiated by the operator. After that, the saw
operates automatically until all pieces are cut or
the stock is exhausted.
All controls are clearly marked and are designed
to also allow the operator to interrupt on
automatic cycle, to cut an individual
cut-to-measure piece and then to resume the
automatic cycle without losing the proper count.
•
Variable speed drive: 62-390 fpm
•
Quick and easy blade installation
•
Rotary wire brush for chip removal and
improved blade life
•
Cast iron 25-1/2" high bed
•
Blade size: 1" x .035" x 10'-10
1
⁄
2
"
•
Enclosed gear box with gears in an oil bath
•
Gravity fed head controlled by counterbalance
springs working with a hydraulic cylinder to
insure constant feed pressure on the blade
•
Two (2) Year Limited Warranty
•
Cutoff length capacity, 1/8"-30"standard,
•
Cutting Capacity 90°...
Round tubing
9"
Round solid
4" or 2500 lbs
Rectangular tubing
8" x 10"
Flat solids
2" x 12" or 950 lbs