Kyocera Strobe K612 - Manual (Page 49)

User Guide for Switch_Back 43
11 U
SING THE
C
AMERA
Tips before operating your
camera
• You cannot activate the camera while
on a call.
• Once the camera is active, the main screen
acts as the viewfinder.
• If you get a “Low memory” error, check your
resolution and quality compression settings.
See “Setting up the camera” on this page.
• If there is no activity within 45 seconds after
you turn your camera on, the camera quits
and returns to the previous screen.
Accessing picture mode
The camera can be used with the flip open
or closed.
Flip closed
Press the external camera key until you hear one
beep to activate picture mode.
Flip open
Press until you hear one beep to activate
picture mode.
Camera settings
1. Press and hold to activate
picture mode.
2. Press the right softkey to select
Options
.
3. Press to select Settings .
4. Highlight an option and press :
– Flash options are Off, On, or Automatic.
– Resolution options are 640 x 480,
320 x 240 (best for sending to email), and
160 x 120.
– Low Light Mode brightens the picture for
low light environments.
– Self Timer options are Off (default) or 3,
5, or 10 second pauses. When set, the
camera beeps from 3 seconds down to the
time the shutter snaps the picture
automatically. Self Timer is not available
when
Multishot mode is activated.
– Multishot allows you to take up to six
multiple pictures while the camera key is
pressed and held. A tone plays each time a
picture is taken. A second tone plays when
the final picture is taken.
– Shutter Sound sets the sound used when
the camera takes a picture.
82-N8757-1EN.book Page 43 Wednesday, April 26, 2006 10:47 AM