Keys Fitness GSM/GPRS Compact Flash Card RTM-8000 - Manual (Page 90)

Using the RTM-8000 80
Changing access codes
To change access codes:
About the access codes
Network Code : The code for accessing your operator’s GSM network. You can
get such code from your operator
Phone code : The code for preventing unauthorized use of your RTM-8000. If
Phone code is enabled, you have to enter it each time you run
Dialer. The default Phone code of your RTM-8000 is 12345678 .
If you change the phone code from its default value, please write
the new code here, or in a safe place of your own choice:
___________________
PIN code : The code that is supplied by your operator upon subscription. If the
PIN code is enabled, you have to enter it each time you run Dialer.
PIN2 code : The second set of PIN code that is supplied by your operator to con-
trol over certain special services.
Select the access code you
want to change from the drop-
down menu.
Enter the old code.
Enter the new code again to
verify.
Enter the new code.
Tap ok .