Kodak DC3400 User Manual
Page 121
Advertising
8
113
Camera
Problem
Cause
Solution
SHUTTER button does not
work.
Camera is not turned
on.
Turn on the camera.
See page 3.
Mode dial is not set to
Capture.
Set the Mode dial to
Capture.
Ready light is
blinking. Camera is
processing picture.
Wait until Ready light
stops blinking before
attempting to take
another picture.
The Status Display
reads Full. The
camera memory card
is full.
Transfer the pictures
to your computer,
delete pictures on the
card (see page 57),
or insert a card with
available memory
(see page 6).
Camera does not turn on.
Batteries are not
properly installed.
Remove and reinstall
the batteries. See
page 3.
Batteries are low or
dead.
Batteries need to be
replaced (see page
3), or recharged (see
page 4). Also, you
could use an AC
adapter.
Advertising