Kicker ST SERIES ST800 - Manual

Installation Instructions
Place the enclosure behind the seat
of your pickup with the tweeter toward
the outside of the vehicle.
Plug the speaker wires securely into
the left and right speaker terminals.
Make certain the polarity is the same
on both sides. Failure to do this will
result in the two channels being out of
phase and will drastically reduce bass
performance.
Components Amplifier Power Frequency Dimensions
Model Type (per enclosure) Min. / Max. Response (H x W x D)
ST1000 2-Way 10” woofer, 6 / 150 40-21kHz 14-1/2”x20-1/2”x7-1/4”
3-3/4” exponential tweeter 36.83cmx52.07cmx18.42cm
ST800 2-Way 8” woofer, 6 / 125 42-21kHz 13-1/16”x18”x6-7/8”
3-3/4” exponential tweeter 33.18cmx45.72cmx17.46cm
All models are 4 Ω, dual enclosure systems
* assumes typical music program with minimal amplifier clipping
ST SERIES
Full Range Enclosure Systems
Specifications
Congratulations! You have just purchased the latest in full range speaker enclo-
sures to carry the famous KICKER name. Your KICKER speakers were designed and
engineered by the same team which created many other international award
winning KICKER components like the Solo-Baric
, Comp VR, and Resolution driv-
ers. They contain a number of cutting-edge features to give you outstanding per-
formance and dependability. Thanks for buying KICKER. Enjoy!
IIM MP PO OR RTTA AN NTT W WA AR RN NIIN NG G
This speaker system is designed to be placed behind the seats of a pickup. If using the
system in any other type of installation, you must securely fasten each enclosure to the
vehicle to avoid potential injury from forward movement of the enclosures during
abrupt stops or accidents.