Kicker SUBWOOFER SOLOX - Manual (Page 3)

Titanium Deposit Impregnated Cone An Ultra High
Performance look that is more rigid for less cone flex and less
distortion.
Advanced Cone Technology The outer edge of the cone has
been rolled to increase cone rigidity to decrease cone flex
under high excursion.
SPAIR (Simple Pull Apart Insertable Replacement) A
stamped steel removable cone assembly. (Patent Pending)
Uniplate V.2 with Vented Hyper-Extended Pole
(Patent Pending)
1. Utilizes “X” Vent technology to insure proper dissipation
of heat away from the voice coil during operation.
2. Provides enhanced heat transfer for cool operation and
maximum power handling.
3. Increases the linear magnetic fields around the voice coil
gap for superior cone motion control.
4. Releases pressure under ISD for freer cone motion and
enhanced low bass.
SLAM (SPAIR Lockdown Attachment Mechanism) The alu-
minum frame attached to the SPAIR which properly secures
the removable speaker assembly (SPAIR) to the BAM (Basket
And Motor assembly).
SPLAT (Speaker Precise Location Alignment Tool) Locates
and anchors the BAM to the baffle of your enclosure.
2
SoloX Subwoofer
F
e
a
tures
Features
ARCTIC Cap (Aluminum Rapid Cooling Thermal Induction
Centering Cap) Mounted on top of the extended pole--piece
it is responsible for insuring the voice coil on the SPAIR is
properly centered when inserted into the BAM, adds more
mass for increased thermal transfer from the voice coil to the
pole piece and channels air into the “X” Vent for increased
cooling.
S4 Quad Spider Array 4 Poly nomex spiders keeps the voice
coil properly centered under high excursion.
Triple Stack Custom Tooled Magnets With a BAM this big, a
double just wouldn’t fill your appetite.
ISD (Inverted Structural Dome ) Further increases cone’s
resistance to flex under pressure.
Stitched Surround Prevents cone/surround separation at high
excursions.
Dual Ultra-Length Voice Coils For high excursion and flexible
wiring options.
Oversized 3.5” Voice Coil With bottom rolled out for
increased retention capabilities.
Strain Relief Boots for Tinsel Lead Wires Large heavy gauge
tinsel lead wire with strain relief boots.
B3-Link 3-Way Connection System which allows you to use
Binding post, terminal Block, or Barrier strip for connecting
the speaker wires.