Kawai DP100 User Manual
Page 7
– 7 –
3. Place the piano on the front half of
the stand so that the metal fitting holes
are seen when viewed from the top.
Slide the piano backward while holding
it with one hand so that it does not
incline and fall from the stand. The
hooks on the piano are then engaged
with the metal fittings on the Side
Panels. Pay attention so that your hand
or fingers are not caught between the
stand and piano. Fasten the piano and
the stand with four bolts (F).
CAUTION: Be sure to secure the piano
to the stand with the screws. If you fail
to do so, the unit could fall from the
stand causing damage or personal
injury.
4. Insert the pedal connection cord that
comes from Pedal Board (C) into the
piano’s pedal jack and fasten with cord
clamps.
5. Turn the Adjuster (installed on the
bottom of C) until it touches the floor to
support the pedal board.
(F)
Hand or Finger
catching hazard
Bottom View
(H)