General features – Kenwood KDC-135 User Manual
Page 6
6
|
English
Audio Control
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Select the Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4
Adjust the Audio item
Turn the [VOL] knob.
Adjustment Item
Display
Range
Subwoofer level *
"L SUB"
–15 — +15
System Q
"FLAT"/"ROCK"/
"POPS"/"EASY"/
"TP40"/"JAZZ"
Natural/Rock/Pops/Easy/
Top 40/Jazz
Bass level
"L BAS"
–8 — +8
Middle level
"L MID"
–8 — +8
Treble level
"L TRE"
–8 — +8
Balance
"BL"
Left 15 — Right 15
Fader
"FD"
Rear 15 — Front 15
Exit Audio Control mode (Volume control mode)
⁄
About System Q
• You can recall the best sound setting preset for different
types of music.
• Change each setting value with the <Speaker Setting>
(page 7). First, select the speaker type with the Speaker
setting.
• "USER": This appears when Bass level, Middle level,
and Treble level are adjusted. When "USER" is
selected, these levels are recalled.
• *Function of KDC-135
5
Exit Audio Control mode
Press any button.
Press a button other than the [VOL] knob and [ATT]
button.
Audio Setup
Setting the Sound system, such as Volume offset.
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Setup mode
Press the [VOL] knob for at least 1 second.
3
Select the Audio Setup item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4
Adjust the Audio setup item
Turn the [VOL] knob.
Adjustment Item
Display
Range
Low Pass Filter*
"LPF"
80/120/160/Off Hz
Volume offset
"V-OF"
–8 — ±0 (AUX : –8 — +8)
⁄
• Volume offset: Sets each source’s volume as a difference
from the basic volume.
• *Function of KDC-135
5
Exit Audio Setup mode
Press the [VOL] knob for at least 1 second.
Bass Boost
Bass sound can be enhanced by one-touch
operation.
Press the [B.BOOST] button.
When you press the button once, the current Bass
Boost setting is displayed.
Each time you press the button, the Bass Boost
setting alternates.
Setting
Display
Bass Boost 1
"L1 BB-L"
Bass Boost 2
"L2 BB-L"
Bass Boost off
"OFF BB-L"
General features