Kentrox DataSmart 488 - Manual (Page 2)

DataSMART
E1/FE1 Frame Monitoring DSU/CSUs
Page 2
The DataSMART 486 and 488 support FrameVision Reporter software to deliver key
performance measurements on individual customer circuits.
Verify Frame Relay performance
DataSMART Frame Monitoring
DSU/CSUs help you isolate circuit
availability problems and measure
round-trip delay from DSU to DSU.
You can see the exact time a service
outage occurred and how long it
lasted, to determine if it was an
isolated incident or a chronic problem.
You can monitor bandwidth utilization
at the port and virtual circuit to deter-
mine the right bandwidth to meet your
application requirements.
Advanced management and
diagnostics
The DataSMART DSU/CSUs have
advanced management features that
enable you to take active control of
your network, such as in-band SNMP
management and an integrated
Ethernet port. Comprehensive E1
diagnostic tools help you identify and
resolve performance issues in the
Frame Relay local loop before they
affect service. With the DataSMART,
you can remotely configure your units,
and receive SNMP traps for important
network events.
Standards-based Management
The DataSMART embedded SNMP
agent supports SETs, GETs and Traps,
as well as standard MIBs, such as
MIB II and the E1 MIB. And for compre-
hensive control, an enterprise MIB
supports all available functions. These
MIBs are available on the ADC Kentrox
web site (www.kentrox.com).
DataSMART Installer for Windows
Free with each unit, DataSMART
Installer software is an intuitive,
Windows-based utility that
dramatically reduces setup time.
Alarms Utility
Downloadable free from
www.kentrox.com, Alarms Utility
monitors the entire network for inter-
face and device errors, posting them to
the event log in an HP OpenView
management system. Customer icons
uniquely identify all ADC Kentrox
devices for easy recognition by the
Network Node Manager.
The DataSMART 488 integrates voice and data traffic onto a single E1/FE1 line.
With in-band management and local Ethernet connectivity, the DataSMART 486 and
488 can be managed easily from a remote or local site. The management system
can be located anywhere on the business network.
DataSMART E1/FE1 Frame Monitoring DSU/CSU Product Portfolio:
DATA
NETWORK USER NETWORK OR VIDEO VOICE RATES
PHYSICAL INTERFACE PROTOCOLS USER PORTS
DataSMART 486 E1 X.21 Clear Channel 1 0 Nx64k,
Single-Port FE1 V.35 Frame Relay 2.048 Mbps
EIA-530
RS449
DataSMART 488 E1 X.21 Clear Channel 1 1 Nx64k,
Single-Port FE1 V.35 Frame Relay 2.048 Mbps
Add/Drop EIA-530
RS449
E1/FE1