Kensington MP-700 - Manual (Page 9)

9
Part Names and Functions
Part Names and Functions
Projector
Operation panel
Buttons for operating the
projector are located here.
See page 12.
Terminal Panel
Connection terminals for a PC or
video source are located here.
See page 11.
Tilt Adjustment Buttons
Press this to adjust the adjustable feet.
See page 18.
Adjustable Feet
Adjustable Feet
These feet are for adjusting the tilt angle as well as the
left and right balance of the projected image. Turning
them counterclockwise raises the main unit, and turning
them clockwise lowers the main unit.
See page 18.
Zoom Adjuster
Turn this ring to adjust the size of the
projected image.
See page 31.
Materials Cover
The scanner and printed matter is located
under this cover.
See page 32.
Handle
Remote Control
Sensor
Adjustable Feet
Projection Lens
Images are projected through this lens.
* Be sure to remove the lens cap when
projecting images.
Focus Adjuster
Turn this to adjust the focus.
See page 31.
Air Vent A (air filter)
(bottom of main unit)
Air is taken in through this vent. An air
filter is provided to prevent dust from
getting inside the projector.
See page 66.
Cha.02 04.7.29, 11:44 AM 9