Kenwood KS-708HT - Manual (Page 5)

5 EN
ENGLISH
KS-708HT 1214/02-06/EN
SURR CENTER SURR BACK
/SW
SUB
WOOFER
SPEAKERS (6-8 Ω)
FRONT
1. Twist wire’s
conductor
4. Release 3. Insert the
conductor
2. Push
(–) (+) Red
Center speaker
(+)
Gray
Blue
(+)
Speaker terminals
(Amplifier or receiver)
(+) Green
White
(+)
Connections
The speaker wires and labels of speakers’ back panel are color-coded to facilitate connection. Connect each wire to the matching-
colored terminal, as shown in the figure.
Be sure to turn off your amplifier before connecting or disconnecting speakers.
Front speakers ➤ ➤
1. The speaker system’s maximum input power is indicated in the specifications. To avoid speaker damage, never run the
speakers at power levels exceeding this limit.
2. This speaker system has a nominal impedance of 8 ohms. To ensure safe and reliable operation, be sure that your
amplifier or receiver is able to work with 8-ohm speakers.
• Never short the (+) and (–) speaker wires together.
• Do not reverse L and R or (+) and (–) connections. Reversal of sides or polarities may result in unnatural, incorrectly positioned
sound.
Surround
speakers
Left Right
Left Right
Subwoofer (option)
(–)
(–)
(–)
(–)
Wire with white line