Kenwood KVT-534DVD - Manual (Page 68)

68 KVT-514/KVT-534DVD
AV Interface Setup
You can set audio and visual (AV) interface
parameters.
1 Display the AV Interface screen
Touch in the "Setup
Menu" screen (page 62).
2 Setup each item
1
2
3
4
1 Moves to the "AV Interface 2" screen.
2 Sets a name to be displayed when you
select a system that is connected via the AV
INPUT port. (
"VIDEO")
When using the rear view camera, set it to
"R-CAM".
3 Sets an image display of the system that is
connected via the AV INPUT port. ( "OFF")
"OFF": When the image source is switched,
an image entered via the AV INPUT
port is displayed.
"ON": When an image signal is entered
via the AV INPUT port, this image is
displayed.
4 Selects a navigation system connection.
( "RGB")
"RGB": Allows the Kenwood's Navigation
System to connect via the AV INPUT
port.
"AV-IN": Allows a third-party navigation
system to connect via the AV INPUT
port.
"Off": Must be used if no navigation
system is connected. (The
navigation display is cancelled
when the AV source is switched.)
Setup Menu
5 6
7
8
9
10
5 Returns to the "AV Interface 1" screen.
6 Moves to the "AV Interface 3" screen.
7 Selects an AV source to be output at the AV
OUTPUT port. ( "AV-IN")
⁄
• When in DVD source, "AV-OUT" cannot be set to USB. Or,
when in USB source, "AV-OUT" cannot be set to DVD.
• If "AV-OUT" is set to DVD or USB, the same source video
or control screen as the front monitor is displayed in the
rear monitor.
• If the front source is switched from DVD (or USB) to
another source, the rear source is also switched to
the same source as front. In this case, displaying the
navigation screen in front monitor allows the rear source
to return to the DVD (or USB). Use the easy control
buttons to operate the front source.
8 Sets output of operation screen such as
control screen to AV-OUT. Operation screen
is not output when set to "Black".
(
"Through")
9 Sets a method to switch to the rear view
camera video display. ( "OFF")
"ON": Switches to the rear view camera
video display when engaging the
shift knob of car to "Reverse".
"OFF": Switches to the rear view camera
video display when engaging the
shift knob of car to "Reverse" and
then pressing the [NAV] button for
more than 1 second.
Make sure to set the AV-IN Name 2 to
"R-CAM" to activate R-CAM Interruption
function.
p You can flip the left and right of the rear
view camera video display. Set to "ON" and
the the rear view will be displayed left and
right in mirror image on the screen.
(
"OFF")