Kodak ZM2 - Manual (Page 16)

10 www.kodak.com/go/support
Getting help
NOTE: If problems persist, go to www.kodak.com/go/support and click Step-by-Step Solutions & Repair.
Problem Solution
Camera will not turn on. ■ Ensure that the battery is charged.
■ Ensure the camera is clean and dry. (If it’s wet inside, let it dry
for 24 hours.)
Videos are choppy or
jumpy when played on a
computer. ■ Use ARCSOFT MEDIAIMPRESSION SE for KODAK Software for
video playback (
see page 8 ).
■ Ensure that the computer system requirements are met. Go to
www.arcsoft.com/support .
Videos are blurry. ■ Ensure that the lens is clean.
■ Ensure that the subject is at least 1 m (3.3 ft) from the lens.
Problems with ARCSOFT
MEDIAIMPRESSION SE for
KODAK Software. ■ Go to www.arcsoft.com/support . (For other applications, go
to their support sites.)