Kathrein HDZ 100 - Manual (Page 9)

9
• Circular cutter, Ø 38 mm
• Cross-head screwdriver for M4 screws
• Power drill
• Twist drill Ø 2.5 mm
• Knife
• Round
fi le or emery paper
• Sikafl ex ® 291 sealant (included in the CAP turntable scope of supply. Comply with the respective
safety instructions for the sealant)
• If required for the type of installation selected: cable ducts (not included in the scope of supply)
REQUIRED TOOLS AND EQUIPMENT
INSTALLATION AND CONNECTION
NECESSARY SPACINGS WHEN USING CABLE DUCTS
Distance of the cable duct from the
casing bottom half for the “roof gland”
variant
Distance of the second cable duct
from the casing lower half for the
“cable continuation” variant
20
20