Konica Minolta FAX2900/FAX3900 - Manual (Page 25)

4 Configuring Printer Driver Settings
4-4
4.2 Common Operations
This section describes settings and buttons that are common to all tabs.
✎
Tip
The tabs referred to this section differ according to the computer’s
operating system.
4.2.1 Common Button
OK
Click this button to exit the “Properties” dialog box and apply all settings
you changed.
Cancel
Click this button to exit the “Properties” dialog box without applying any
changes.
Apply
Click this button to apply all settings you changed without exiting the
“Properties” dialog box.
4.2.2 Orientation
Use this setting to specify whether your document should be printed in
portrait (vertical) or landscape (horizontal) format.
To specify the orientation:
❍ Windows XP/2000: Select the [Layout] tab, and then select “Portrait”
(vertical) or “Landscape” (horizontal) under orientation.
❍ Windows Me/98: Select the [Paper] tab, and then select “Portrait”
(vertical) or “Landscape” (horizontal) under orientation.
4.2.3 Paper Source
The Paper Source item sepcifies the tray from which paper is fed in the
machine. The following paper sources can be selected: Auto, Tray1,
Tray2 (optional), and Bypass Tray.
To specify the paper source:
❍ Windows XP/2000: Select the [Paper/Quality] tab, and then select the
desired tray from the “Paper Source” list.
❍ Windows Me/98: Select the [Paper] tab, and then select the desired
tray from the “Paper Source” list.