Kompernass Parkside XQ2 - Manual (Page 7)

j Sand difficult to reach places with the front or
side corners of the backing plate
O .
L Maintenance and cleaning
Attention: before starting any work on your sander,
always pull the plug out of the mains socket.
j Remove any dirt from the tool, surfaces and
other items in the working area immediately
after you finish work.
j Clean the safety filter Y of the dust extraction
box T by pulling the safety filter out of the dust
extraction box T . Suck out the debris carefully with
a vacuum cleaner using a low suction pressure.
j Clean the tool and remove any adhering dust
with a narrow paint brush.
j Never any kind of sharp object or petrol, solvents
or cleaning agents that might attack plastic. Do
not allow any liquids to enter the inside of the
tool.
j Always keep the ventilation slots I clear.
L Disposal
The packaging consists entirely of envi-
ronmentally-friendly materials. It can be
disposed of at your local recycling facility.
Do not dispose of electric tools in
the household waste!
In accordance with European Directive 2002 / 96 / EC
about waste electrical and electronic equipment and
its transposition into national legislation, worn out
electric tools must be collected separately and taken
for environmentally compatible recycling.
Contact your local refuse disposal authority for more
details of how to dispose of your eletric tools.
L Information
L Service
Details of the Service Centre responsible for your
region are shown in the warranty documents.
L Declaration of conformity /
Producer
We, Kompernaß GmbH, Burgstr. 21, D-44867
Bochum, Germany, hereby declare that this product
complies with the following EU directives:
Machinery Directive (98 / 37 / EC)
Low voltage directive (73 / 23 / EEC)
Electromagnetic compatibility (89 / 336 / EEC)
Applicable harmonized standards
EN60745-1:2003+A1, EN60745-2-4:2003,
EN55014-1:2000+A1+A2, EN55014-2:1997+A1,
EN61000-3-2:2000+A2, EN61000-3-3:1995+A1,
EN50366:2003
and confirm this with the CE symbol.
Type / Machine designation:
Palm detail sander XQ
2
Bochum, 01.07.2006
Hans Kompernaß
- Managing Director -
We reserve the right to make technical modifications in the course
of further development.
9 UK / IE
Operation / Maintenance and cleaning / Disposal / Information