KTI Networks KS-117FM-V - Manual (Page 25)

-25-
3.4.1 Port-based VLAN
Click [VLAN Mapping Table]
This page is used to setup member ports for each VLAN group. Total of
16 VLAN groups are supported.
The steps to configure the member ports are:
1. Select Group number : 0 ~ 15.
2. Set [Yes] on the selected port to include it into the member port list.
Note:
One port can belong to more than one VLAN groups. VLAN group table
mapping index is based on the least four bits (bit 3 ~ bit 0) of the PVID of
the input port.