Kirkland Signature 3406079 - Manual (Page 9)

9
5. (OPTIONAL STEP) On some models, the Cycle
Signal selector is part of
the Start button. Set the
Cycle Signal selector to
On if you want the dryer
to sound a signal when a
cycle is finished. The sig-
nal is helpful when you
are drying permanent
press, synthetics, and
other items that should
be removed from the
dryer as soon as it stops.
6. Push the Start button.
NOTE: Your dryer stops automatically when a
cycle ends.
S
TARTING YOUR DRYER
(CONT
.
)
USING YOUR DRYER
Stopping and restarting your dryer
You can stop your dryer anytime during a cycle.
To stop your dryer:
Open the dryer door or turn the Cycle Control
knob to Off.
NOTE: The Cycle Control knob should point to an
Off area when the dryer is not in use.
To restart your dryer:
Close the door, select a new cycle and tempera-
ture (if desired), and push the Start button.