Kensington M Series - Manual (Page 19)

10 Ascentia M Series User’s Manual
Adjusting the LCD Display
You may wish to adjust the LCD display when you begin using
your computer. A TFT LCD does not require adjustment for
contrast because the contrast is set to remain at maximum. You
can adjust both the brightness and contrast on a DS-STN LCD.
To adjust the brightness of the LCD:
•
Press <Fn+Right Arrow> to increase the display
brightness.
•
Press <Fn+Left Arrow> to decrease the display
brightness.
•
Press <Fn+Up Arrow> to increase the display contrast.
•
Press <Fn+Down Arrow> to decrease the display
contrast.
Making Backup Disks
Ascentia M computers that ship from the factory with Windows
95 installed include one or two restore CD-ROMs. The restore
CD-ROM contains a copy of your computer’s operating system
and some of the factory-installed software.
In the unlikely event that programs on the computer hard drive
become corrupted or are erased, you can use the restore CD-
ROM to reinstall them. To restore software, follow the directions
included with the CD-ROM.
Before you use the Restore CD-ROM, make sure that System
Setup specifies the CD-ROM drive as the first boot device. For
more information on selecting the boot device, see “Boot Menu”
on page 55.
Use the Create System Disks utility in Windows 95 to make
backup disks of any software not included on the restore CD-
ROM. To open the Microsoft Create System Disks utility, click
the Start button on the taskbar, select Programs, select Accessories,
select System Tools, and click Create System Disks.
3754-1.bk : 3754-1.fm Page 10 Wednesday, July 30, 1997 2:33 PM