KITCHENAID KESC307 - Manual (Page 40)

40
3. Press desired Number pad.
Use the “Convect full meal chart” later in
this section as your guide for selecting
a cycle.
NOTES:
• You can change the Convect Full Meal
cycle any time before pressing START
by repeating Step 3.
• You can program your own cycle,
which you can then select in the future
by pressing just CONVECT FULL MEAL
and START. (See “To program your
own cycle” later in this section for more
information.)
4. Start oven.
5. When the Convect Full Meal
cycle is done:
Four tones will sound, followed by four
reminder tones every minute until you
open the door (unless the audible signals
have not been disabled), remove the
probe, or press CANCEL/OFF.
PRESS YOU SEE
HR MIN MIN SEC
(example for cycle 1)
ON
NIGHT LIGHT DELAY
SET
RAISING
BREAD
O
F
COOK
DEHYDRATE
TIME
COOK TEMP CLEAN TIME
STANDARD ENTER
CONVECTION
PROBE TEMP
FOOD AT
CHECK
DOOR
CLOSE
EASYCONVECT
1
PRESS YOU SEE
NIGHT LIGHT DELAY
SET
RAISING
BREAD
O
F
COOK
DEHYDRATE
TIME
COOK TEMP CLEAN TIME
STANDARD ENTER
CONVECTION
PROBE TEMP
FOOD AT
CHECK
DOOR
CLOSE
EASYCONVECT
ON
START
YOU SEE
NIGHT LIGHT DELAY
SET
RAISING
BREAD
O
F
COOK
DEHYDRATE
TIME
COOK TEMP CLEAN TIME
STANDARD ENTER
PROBE TEMP
CLOSE
EASYCONVECT
FOOD AT
CHECK
CONVECTION
ON
(or 177°C)
U
sing and Caring for Your Oven