Button adjusting monitor brightness – Konica Minolta DIMAGE-Z20 User Manual

Page 28

Advertising
background image

28

B

ASIC RECORDING

Pressing the information (i

+

) button changes the monitor display. The display cycles

among the standard display, real-time histogram, and live image only.

Standard display

Live image only

Information button

i

+

BUTTON

ADJUSTING MONITOR BRIGHTNESS

Set LCD brightness

:adjust

:enter

Low

High

The monitor image can be made lighter or
darker. The brightness level can be set
individually for viewfinder and direct viewing.
Turn the mode switch to the appropriate
position. Press and hold the information (i

+

)

button to open the LCD brightness screen.

Use the left/right keys of the controller to adjust
the brightness; the monitor image changes
accordingly. Press the center of the controller or
the menu button to set the brightness level.

The real-time histogram shows the approximate
luminance distribution of the live image. This
histogram cannot show the affect of flash illumination.
The histogram of a recorded image may not show the
same distribution as the real-time histogram.

Real-time histogram

DiMAGE_Z20_English_B412.qxd 04.12.27 16:52 Page 28

Advertising