Kompernass BALANCE KH 8090 - Manual (Page 11)

11
5. Attaching the appliance
Use the appliance only on persons whose wrist 'fits' the
pressure sleeve. The sleeve must be attached lightly and
closed firmly with the Velcro fastener. If ...
- the wrist is too thin, it may not be possible to pump up
the pressure sleeve sufficiently, and in this case an exact
measurement is not possible.
- the wrist is too thick, it may not be possible to fasten the
pressure sleeve firmly enough and, in this case too, an
exact measurement is possible.
Important: Do not use the appliance if you have any injuries
or lesions to the wrist. These could be aggravated by the
pressure when the sleeve is pumped up.
A measurement of blood pressure can only be meaningful if
the blood circulation has settled. You should therefore be
seated calmly, and wait for about 3 to 5 minutes before
taking a measurement.
ᕡ Attach the appliance to the inside of the wrist, as
shown.
ᕢ Close the Velcro fastener firmly, but in such a way that
the sleeve is applied evenly all round.