Knoll Systems HT200 - Manual (Page 19)

of the selected menu item. value of the selected menu item.
Selecting the projection type; Floor, Ceiling, Rear and Front
This reorients your image for your type of projection.
1. Press MENU to display the main menu.
2. Press the cursor up or down key to select "SETTING MENU."
3. Press L-CLICK to display the SETTING MENU.
4. Press the cursor up or down key to select "PROJECTION."
5. Press the cursor +/- key to select the projection type, which suits the Projector setup
conditions.
The following four projection types can be selected:
a. FRONT FLOOR (Normal).
b. REAR CEILING (Upside down and horizontally reversed).
c. REAR FLOOR (Horizontally reversed), or
d. FRONT CEILING (Upside down).
6. Press L-CLICK.
Selecting a display language
1. Press MENU to display the main menu.
2. Press the cursor up or down key to select "SETTING MENU."
3. Press L-CLICK to display the SETTING MENU.
4. Press the cursor up or down key to select "LANGUAGE," then press the cursor + / - to select
one of the following languages:
ENGLISH (English),
DEUTSCH (German),
FRANCAIS (French),
ITALIANO (Italiano),
ESPANOL (Spanish),
SVENSKA (Swedish),
JAPANESE
5. Press L-CLICK again.
Adjusting the volume
The volume can also be adjusted with VOLUME +/- on the remote control (see page 19).
1. Press MENU to display the main menu.
2. Press the cursor up or down key to select "IMAGE ADJ MENU."
3. Press L-CLICK to display the IMAGE ADJ MENU.
4. Press the cursor up or down key to select "VOLUME," then press the cursor +/- key to adjust
the volume.
Selecting the background
1. Carry out steps 1 to 3 in "Selecting the projection type" on the left column.
2. Press the cursor up or down key to select "BACKGROUND."
3. Press the cursor +/- key to select one of the following background types:
• BLUEBACK,
• BLACKBACK, or
• FOCUS PATTERN.
4. Press L-CLICK.
19